Mirrora – Self-adhesive Mirror-Like Wall Strips (20 pieces)
Free Shipping with Canada Post
FREE Canada Shipping
Due to high order volume, stock is very limited. If you can still click 'Add to Cart', there is stock available.
Turn One Plain Wall Into Your Best Room
You've walked past that wall for years.
Now picture it lined with slim gold mirror strips, catching the afternoon light and making the whole room feel wider.
You press each strip on by hand — no drill, no nails, no glue mess.
Straight lines are all it takes.
And when you step back, the part you'll like most isn't the wall.
It's that you did it yourself.
Acrylic, Not Glass — So A Strip That Falls Won't Shatter On Your Floor
✓ A designer wall for under one dinner out
Mirror panels cost hundreds plus installation. These press on in an afternoon and give you the same bright, layered look for a fraction of it.
✓ No drill, no nails, no holes to patch
Peel the backing, line up the edge, press. Nothing goes into your wall — which matters if you rent, or you just hate patching plaster.
✓ You decide the layout, not the box
This is the part a single hung mirror can't do. Space them wide for a soft grid. Line them close for one tall column. Same set, completely different wall.
✓ Bounces daylight into your darkest corner
Mirror-like surfaces throw light back into the room. A dim hallway or a boxy bedroom instantly reads brighter and bigger — no new lamp needed.
What you get today
- Mirrora self-adhesive acrylic mirror-like wall strips
- Choice of 5 finishes
- Adhesive backing pre-applied — peel and press, nothing to buy separately
- Arrange in any layout you like: grid, column, or scattered
- Free tracked shipping
- 30-day money-back guarantee
Seasonal production run — once this batch sells out, restock pricing may change.
Bring Mirrora to your wall today while this batch is still in stock.
30-day at-home trial
Try Mirrora at home for 30 days. If it doesn't deliver the intended result or isn't as easy to use as described, return it for a full refund.
Frequently asked questions
How do I keep the strips straight?
Use a strip of painter's tape as a guide line, or a level app on your phone. Mark your top edge first, then work down. Most people find the second strip goes on faster than the first.
Can I remove them later?
Yes. Warm the edge gently with a hair dryer for about 30 seconds, then peel slowly at an angle. Go slow on older or freshly painted walls.
Will they work in a bathroom?
They handle normal humidity fine, but avoid placing them directly inside a shower stall or anywhere water hits them repeatedly.
Can I cut them to fit a smaller wall?
Yes. Acrylic cuts cleanly with a utility knife and a straight edge. Score firmly a few times, then snap along the line.
How to use
- Step 1: Wipe the wall clean and let it dry completely. Dust and grease are the main reasons adhesive lets go.
- Step 2: Mark your layout with light pencil marks or painter's tape. Take 1–2 minutes here — it saves you the crooked result.
- Step 3: Peel the backing from one strip. Line up the top edge with your mark, then press down from top to bottom.
- Step 4: Run your palm firmly over each strip once it's placed. Leave it 24 hours before touching or adjusting.
Specifications
- Size: 2.0 × 19.7 inches per strip
- Material: Acrylic with pre-applied adhesive backing
- Lasts: Stays flat and reflective with normal indoor use
- Package includes: 20-pieces Mirror-Like Wall Strips
How to wash
- Wipe with a soft, dry cloth or a slightly damp microfiber cloth
- Do not use abrasive pads or ammonia-based cleaners
